“Friendly travel trailblazer. Certified gamer. Evil bacon practitioner. Analyst. Problem solver.”
SEEKONE Heat Gun 1800W 122℉~1202℉（50℃- 650℃） Fast Heating Heavy Duty Hot Air Gun Kit Variable Temperature Control Overload Protection with 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint(5.2FT)
$28.99 in stock
- ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
- ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
- ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
- ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
- ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you
DIAFIELD 1850W Heat Gun Variable Temperature Settings 112℉~1202℉（44℃- 650℃), Fast Heat Hot Air Gun, Durable & Overload Protection, with 4 Nozzels for Shrink Wrap, Vinyl, Crafts, Epoxy Resin(5.9FT)
$21.97 in stock
6 used from $19.51
- Fast Heat Up & Adjustable Temperature -- 1850W Heat Gun produces strong, stable power with quick heat up in only 1.5s. Variable temperature settings range from 112℉ to 1202℉ and includes two air flow modes: 250L/min and 500L/min. Best Christmas gift to Dad, Men
- 800H Service Life -- The components of this hot air gun are made to last, and encased in a high-durability shell. Oxidation heating wire, fan, and mica board are all made of high temperature-resistant material, and along with a all-copper motor, support a product lifespan up to 800 hours
- Convenient to Use -- The design of the flat Rear Cover and bracket is ideal for standing the heat gun upright to free your hands. Scientific ergonomic-design handle prevents strain injuries from long-term use and makes holding the heat gun easier for longer
- Wide Variety of Applications -- 4 nozzle attachments are included to meet many different application needs. Ideal use for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, and so much more
- Comprehensive Protection -- The built-in temperature control switch helps avoid overheating or damage to parts caused by hot air backflow. UL-certified wire and anti-scalding sheath ensure safe use. Our heat gun also possess an overload protector to avoid damaging the product and its circuitry. And it has been tested and approved by UL and ETL standard.
Wagner Spraytech 2417344 HT1000 Heat Gun Kit, 3 Nozzles Included, 2 Temp Settings 750ᵒF & 1000ᵒF, Great for Shrink Wrap, Soften Paint, Bend Plastic Pipes, Loosen Bolts and More
13 used from $24.99
- DUAL TEMP HEAT GUN: The HT1000 Heat Gun Kit offers a 750ᵒF and 1000ᵒF temperature setting to help complete household home improvement tasks or projects that require heat
- HEAT GUN FOR HOUSEHOLD PROJECTS: Use this electric heat gun to easily loosen rusted bolts, shrink heat shrink tube, remove flooring, thaw frozen pipes, shrink wrap, heat PVC, remove paint from furniture for paint removal, and more
- INCLUDES THREE NOZZLES ATTACHMENTS: The kit includes an edge protector nozzle for directing heat away from delicate surfaces. The flare nozzle distributes heat across a long, narrow area. The concentrator nozzle outputs heat in a small, focused area
- DURABLE WITH BUILT IN SAFETY: Features a corrosion resistant nozzle for long lasting use and has an integrated stand for safe, hands-free operation
- CUSTOMER CENTRIC: Wagner has been in the business for 50+ years and puts safety first and our products are ETL Listed (tested and approved by Intertek to UL and CSA Safety Standards). Have questions? Our U.S based customer service team is happy to help!
SEEKONE Mini Heat Gun, 350W 662℉ (350℃) Fast Heat Handheld Hot Air Gun Tool with Reflector Nozzle and 4.9Ft Long Cable Overload Protection for Craft Embossing, Shrink Wrapping and Stripping Paint
$14.21 in stock
- ★【HIGH POWER TOOL】: Electric mini heat gun with 3.0Amp motor can reach temperature 662℉ (350℃）and air flow 300L/min within seconds to make your work more efficiently. 4.9ft ultra long cable helps you do crafting in large area more conveniently.
- ★【PREMIUM QUALITY & SAFE】: Built in over-heat protection, the current of this heat gun tool will be cut off automatically when temperature is overheated to avoid melting and fire. Made of high quality impact-resistant PA6+30GF body and with nozzle safety shield to ensure maximum security for you.
- ★【ERGONOMIC DESIGN】: Pencil-like design and light weight make the hot air gun fit comfortably in your hand. And the mini heat gun is especially ideal for getting into hard-to-reach places and concentrating high heat on the tight area. Retractable bracket lets this heat shrink gun stand on the table stably and use it hands-free.
- ★ 【VERSATILE APPLICATION】: Wide use and perfect for DIY projects. This mini heat gun can be used for shrink wrapping, soldering, paint removing, air bubble removing, candle making, electronics repairing, watercolor drying, defrosting and so on. If you like DIY, it is a great tool for you to make your own handmade work.
- ★【WHAT YOU GET】:1 x 350W Heat Gun, 1 x Reflector Nozzle, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact our team at any time, we will be always here for you.
BLACK+DECKER Heat Gun, 1350 Watt, Dual Temperature Settings, Corded (HG1300)
8 used from $26.24
- VERSATILE USE – 1,350 W heat gun is useful for a variety of applications, such as stripping paint, loosening rusted nuts, thawing pipes, and more.
- DUAL TEMPERATURE SETTINGS – Switch between 750°F and 1,000°F temperature settings.
- BUILT-IN STAND – Makes cooldown easier and safer.
- 3-POSITION SIDE HANDLE – Provides a comfortable grip and superb control for all applications.
- LIGHTWEIGHT AND COMPACT – Simple to maneuver and reduces muscle fatigue.
SEEKONE Heat Gun 1800W Heavy Duty Fast Heat Hot Air Gun Kit with 752℉&1112℉（400℃-600℃） Dual-Temperature Settings and 4 Nozzles with Overload Protection for Crafts, Shrinking PVC, Stripping Paint
2 used from $19.19
- ⏩【1800W Strong Power With 2 Settings】This heat gun features two modes with two heat outputs, I: 752℉, 250L/min, II: 1112℉, 500L/min. With a strong power of 1800W, this hot air gun can quickly heat up to 1112℉ in seconds. The SEEKONE Heat Gun has nearly unlimited versatility, generates enough hot air for almost any project, especially if you are a crafter, or DIYer.
- ⏩【Safe and Reliable】This professional heat gun is UL certified and tested for fire-resistant materials. Built-in overload protection shuts the heating element down and prevents burn-up.
- ⏩【Ergonomic Handle & Fireproof Materials】The outer layer of this SEEKONE gun handle is wrapped with TPE rubber, which has an excellent feel and is non-slip and labor-saving. The excellent PA6 flame retardant nylon composite material is used around the air outlet, which can prevent the high temperature air from blowing out and cause the gun to burn and cause danger.
- ⏩【Convenience Use & Wide Applications】The hot air gun does have a hanging hook, easy to store. Built-in stand extends comfort to reduce hand fatigue from prolonged use. It can stand vertically on a counter or workbench. Ideal use for stretch leather (extend your belt), dry up foggy headlights, craft embossing, and you can even cook with it!
- ⏩【Excellent Customer Service】SEEKONE Heat gun comes with instruction guide and four accessories. You also get a lifetime warranty from the SEEKONE team. Please feel free to contact us if you have any questions about the product.
Genesis GHG1500A Dual Temperature Heat Gun Kit With Fast Heat High And Low Settings 572F/1000F, Air Reduction Nozzle, Reflector Nozzle, And Two Deflector Nozzles with 2 Year Warranty
$19.94 in stock
6 used from $18.76
- 1500/750 watt heat gun with powerful 12.5 amp motor
- High and low temperature settings for versatility
- Deflector nozzles protect glass and other surfaces
- Reflector nozzle speeds Thawing of pipes. 3-Position rocker type switch for high temperature, off and low temperature
- Includes: (2) deflector nozzles, (1) reflector nozzle and (1) air reduction nozzle
6.56FT Long Heat Gun, Uptdae Version Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp
$11.59 in stock
- ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
- ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
- ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
- ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
- ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
Heat Gun 1500W 572°F~ 932°F Dual Temperature Hot Air Gun-HGP68AC
- adopts nickel-chromium mica double electric heating wire structure: to minimize heat loss, the annular air outlet is more concentrated, and there are 2 kinds of temperature and wind speed that can be switched freely: 350°C-350L/min and 550°C-550L/min . In terms of operation, there is not only a good operating experience and comfort: the center of gravity of the heat gun is located above the handle, and the balance is very good. The back cover is parallel to the ground and you can turn it upside down.
- Two kinds of Temperature and Wind Speed can be Switched Freely: 350°C-350L/min and 550°C-550L/min)
- Comfortable Operating Experience: The center of gravity of the heat gun is located above the handle, and the balance is very good. The back cover is parallel to the ground, you can turn it upside down
- Four Types of Nozzles: heat reflector nozzle, concentrated nozzle, wide concentrated nozzle, glass protection nozzle, wide range of functions
- High-Temperature Automatic Trip Switch: it can be used with confidence to ensure safety
DEWALT Heat Gun with LCD Display & Hard Case/Accessory Kit (D26960K) , Yellow
- LCD display of DEWALT heat gun allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
1800W Heat Gun, GoGonova Heavy Duty Soldering Hot Air Gun, Stepless Adjustment 122℉ to 1202℉ with Application Icon, Dual Airflow, Compact Design with 5 Nozzles for Shrink Tubing, Wrap, Crafts, Resin
- Compact & Powerful – Improvement on mechanism effectively reduces 20% of size comparing to traditional heat guns, ideal for craft and DIY. Lightweight but powerful, 1800W output heat gun is also a smart choice for professional tasks.
- Variable Heat & Airflow – Featuring stepless heat adjustment from 122℉ to 1202℉. Exclusive dial design with application icon for quick identify of the right temperature you need! Dual airflow settings (300L/500L) easily cover both delicate work and heavy-duty work.
- Wide Applications with 5 Nozzles – Replaceable 5 nozzles: Reducer nozzle/5 step nozzle for detailed soldering, shrink wrapping, vinyl repair; Reflector nozzle for shrinking tubing, bending pipes; Flat nozzle for paint removal; Charcoal nozzle for BBQ coal ignition.
- Safe & Ergonomic – Built by heat-resistant materials and overload protection both prevents overheating. Ergonomic design includes ergonomic handle for comfort using, and integrated stand for hands-free operation.
- Packing List – 1×GoGonova Heat Gun, 1× Reducer Nozzle, 1× Deflector nozzle, 1× 5 Stage Nozzle, 1× Flat Nozzle, 1× Charcoal Nozzle, 1× Manual.
Makita HG6530VK Variable Temperature Heat Gun Kit with LCD Digital Display
- Push-button temperature control (122 - 1, 202°F) for precise control over a wide variety of applications with LCD temperature reading
- Slide switch sets three air flow settings (cooling, low, high) for greater versatility
- Push-button temperature control increases by 50°F increments for exact temperature adjustment
- Compact 2. 0 lb. design features a rubberized pistol grip handle and an integrated rear stand
- Ideal for vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more
Heat Gun 2000W Fast Heat Heavy Duty Hot Air Gun Adjustable Temperature Control 122~1112℉ (50-600℃) Dual Speed 4 Nozzles for DIY Crafts, Shrinking Tubes, Bending PVC, Stripping Paint from Plusivo
- High power with strong airflow: quickly heats up with dual speed airflow control to meet your heating requirements [II: 500 L/min, I: 250 L/min]
- Stepless temperature adjustment: rotate the black dial to adjust the temperature in the range 122-1112℉ (50- 600℃) to help user in various tasks and DIY projects; can be used for shrinking wrap and heatshrink tubes, removing paint and adhesives, etc
- Easy to use for household projects: ideal for bending PVC, loosening rusted bolts, heating or thawing pipes, removing tiles and flooring, vinyl wrapping, crafting, car film, weld pipe; with stand for hands free operation
- With Useful Accessories: 4 nozzles (2 concentrator or reducing nozzles to concentrate the hot air in a small area, 1 reflector nozzle disperses heat flow evenly around the whole work surface, 1 deflector nozzle or glass protection nozzles)
- Includes a paint scraper and a brush as tool in your DIY tasks; with 30-day manufacturer guarantee and lifetime customer support
SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit With Carry Case Variable Temperature Control 122℉~1112℉（50℃- 600℃） Overload Protection with 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint
- 【Fast Heat Up & Adjustable Temperature】SEEKONE 1800W Heat Gun produces strong, stable power with quick heat up in only 1.5s. Two modes: I: 120℉-840℉(50℃-450℃), 190-210L/min; II: 120℉-1112℉(50℃-600℃), 250-500L/min.
- 【Comprehensive Protection】The built-in temperature control switch helps avoid overheating or damage to parts caused by hot air backflow. UL-certified wire and anti-scalding sheath ensure safe use. Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
- 【Various Nozzles & Accessories】 Our hot air guns contain a total of 7 accessories. 5 Different heat gun nozzles used for controlling the flow of air and focusing heat to the desired area. Ideal use for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, and so much more.
- 【Scientific Ergonomic Design】Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.Our Heat Gun Kit come with compact durable carry case for suitable and easy access, great design for convenient carry.
- 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
Heat Gun, PRULDE 1500W Dual Temperature Settings 572°F~1112°F Fast Heating Hot Air Gun with 6.5Ft Power Cord/4 Nozzles/Overload Protection for Crafts, Shrink Wrapping/Tubing, Paint Removing(N2190)
$18.44 in stock
- ▶DUAL TEMPERATURE SETTINGS - 2 Temperature settings [572℉ & 1112℉] and 2 Air flow speed control [II: 500 L/min, I: 300 L/min], which can satisfy all your heating requirements.
- ▶STRONG POWER – 1500W Craft heat gun help heats up to maximum temperature 1112℉ within 1.5 seconds, and its professional DC copper motor can guarantee more stable operation.
- ▶USER FRIENDLY - The 6.5Ft power cord with UL certified plug supports wider range of use, extermemly convenient for you to move freely in a large work area. In addition, the back support gives stability when you’re putting it down for hands free operation.
- ▶SAFETY - Upgraded built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
- ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet your different application needs. It is great for shrink wrapping, epoxy resin, shrink tubing, crafting, electronic repairs, vinyl wrapping, paint removal, etc.